Ships directly from the manufacturer - standard shipping time is 7-14 days
Press the footswitch once. LED indicator shows red, which means SOS looper is in rec. status.
Hit the footswitch again when you finish your riff. LED indicator shows green, which means SOS looper is in playback status. The riff starts to loop continuously. LED indicator flashes every time when reaching the beginning of the loop.
The Maximum loop time is 5 mins.
Once you have your first loop, SOS looper would let you overdub your new riff infinitely.
To overdub over the riff, single press the footswitch during playback. Now the LED will turn from green to red, which means SOS looper is in the recording status again and you are good to go.
Press again when you finishing your loop and SOS Looper goes back to playback status.
SOS looper plays all the overdub riff when in playback status. The new overdubbed riff doesn't affect the length of the original loop and the layers for overdubbing are unlimited.
-UNDO THE LOOP
Press and hold the footswitch longer than 1.5s to undo the last riff. There is only one last layer that is able to be undone.
When undoing the loop, the LED indicator will flash quickly.
-REDO THE LOOP
You might want to redo the undo, press, and hold the footswitch again longer than 1.5s, this will redo the loop that you just undo.
When redoing the loop, the LED indicator will flash quickly.
Stop Rec/Play, double press the footswitch, stop recording, or start to play.
The LED indicator will flash in stop status to remain you the loop is still stored and is ready to go.
To erase the whole loop, long-press the footswitch in pause status. Double press and hold the second setup in Rec/Play Status.
When the LED indicator lights off. It means there is no loop now in SOS. You could start to build a new loop. In this status, the footswitch is for True bypass.
-STORE THE CURRENT LOOP
When the power of SOS is off, SOS automatically saves the loop from last time. When you power SOS up again, the LED indicator shows green and flashes. This means the loop from last time is still available. A single press will start to play. If you need to record or overdub, please refer to the previous section about them.
Powered by AC adapter.
Mini and portable, the enclosure is an aluminum alloy shell.
LED indicator shows the working state.
Rubber pads on the backside are anti-skid, which enhances stability and avoids friction between the effect pedal and the ground.
Main Material: Aluminum alloy
Input Impedance: 1M Ohms
Output Impedance: 10K Ohms
Power Supply: External AC adapter delivering 9V DC regulated minimum 300mA center negative (not included)
Item Size: 9.4 * 5.1 * 5.3cm / 3.7 * 2 * 2.1in
Item Weight: 175g / 6.2oz
Package Size: 10 * 7.5 * 6.2cm / 3.9 * 3 * 2.4in
Package Weight: 213g / 7.5oz
1 * Guitar Effect Pedal
1 * User Manual(English)